SPECIFICATIONS
- Inlet: 2" Male Pipe Thread
- Outlet: 2" Female Pipe Thread
- Flush Port: 2" Female Pipe Thread
- Maximum Operating Water
- Pressure: 90 psi
- Minimum Pressure for Backflush: 30 psi
- Minimum Flow for Backflush:
- Standard Model - 35 GPM
- Low Flow Model - 20 GPM
- Minimum Allowable pH: 5
WATER QUALITY GUIDELINES
GOOD WATER QUALITY: Municipal water supply or well water from a clean aquifer with no sand, iron or manganese.
AVERAGE WATER QUALITY: Wells with small amounts of sand (<2 ppm) or clean surface water which includes lakes, ponds, reservoirs and canals.
POOR WATER QUALITY: Well water with sand up to 10 ppm or surface water in hot climates with increased biological growth and no chemical treatment which includes lakes, ponds, reservoirs and canals.
VERY POOR WATER QUALITY: Well water with greater than 10 ppm of sand including rivers, muddy canals, lakes and ponds with severe run off deposits and raw municipal wastewater.
GREATER THAN 3 PPM SAND OR SILT: May require a pre-filter such as a hydrocyclone.
