Series 80 Nylon Control Valves

1" Globe Electric Control Valve
1 1/2" and 2" Globe 2-Way Electric Control Valves
1 1/2" and 2" Angle 2-Way Electric Control Valves
1 1/2" and 2" Globe/Angle 3-Way Pressure Reducing Control Valves
1 1/2" and 2" Globe/Angle 3-Way Pressure Sustaining Control Valves

Series 80 Control Valves have quick reaction and drip tight closure for precise and accurate irrigation. The exceptionally low inrush and holding currents allow longer wire runs from valve to controller saving installation time and money. Made from durable and corrosion-resistant nylon materials, the simple design means quick installation with minimal maintenance. Now available in both 2-Way and 3-Way options.

PRODUCT ADVANTAGES

  • Flow control stem allows manual control from full closure up to maximum capacity.
  • Suitable for dirty water applications with clog-free labyrinth inlet for command water.
  • Quick reaction to opening and closing and a drip-tight seal for accurate irrigation.
  • Available in multiple body configurations and control functions.
  • Very low friction loss allows valve use with a wider range of flows.
  • Durable, corrosion resistant materials for long life.

3-WAY SERIES 80 VALVE FEATURES

  • All control systems (pilot and solenoid) are assembled on the bonnet. No tubes are connected to the valve body.
  • Tight sealing vale with fully supported diaphragm.
  • Straight of angle with globe configuration activated by a fully supported diaphragm.
  • Integrated check valve ensures valve remains closed until the controller designates opening.
  • Vertical or horizontal installations.

3-WAY SERIES 80 VALVE APPLICATIONS

  • Pressure regulation of irrigation systems - small blocks
  • For remote control, master valve, automated or manual operations - accurate irrigation control
  • Greenhouse and Nursery irrigation including hydroponic and mist systems

2-WAY SERIES 80 VALVE FEATURES

  • Suitable for high pressure applications with quick reaction to opening and closing.
  • Exceptionally low inrush and holding current allows the longest wire run from valve to controller.
  • Tight sealing valve with fully supported diaphragm.
  • Stable solenoid to voltage fluctuations with low sensitivity to dirt - no diode solenoid.
  • Integrated check valve (1 1/2" and 2" sizes) ensures valve remains closed until the controller designates opening.
  • Optimal for vertical installations.

2-WAY SERIES 80 VALVE APPLICATIONS

  • For mild corrosive and mild acidity levels in the water
  • For remote control, master valve, automated or manual operations
  • Greenhouse and Nursery irrigation including hydroponic and mist systems

1" Globe Electric Control Valve
1 1/2" and 2" Globe 2-Way Electric Control Valves
1 1/2" and 2" Angle 2-Way Electric Control Valves
1 1/2" and 2" Globe/Angle 3-Way Pressure Reducing Control Valves
1 1/2" and 2" Globe/Angle 3-Way Pressure Sustaining Control Valves

Series 80 Control Valves Technical

3-WAY SERIES 80 VALVES

Specifications

  • Recommended flow ranges:
    • 1 1/2" valve - .25 to 110 GPM
    • 2" valve - .25 to 176 GPM
  • Valve Configurations:
    1 ½” and 2” – Globe or Angle
  • Minimum Operating Pressure: 7 psi
  • Maximum Operating Pressure: 150 psi
  • Maximum Water Temperature: 140° F
  • Optional Solenoid Voltages: 24VDC, 12VDC, 12VDC latching, 120VAC

Materials

  • Body, Bonnet, Diaphragm Seat: Glass Reinforced Polyamide (GRP)
  • Nuts, Bolts, Washers – Stainless Steel 304
  • Spring – Stainless Steel AISI 302

*Tested by Center for Irrigation Technology, Fresno, California, November 2010


2-WAY SERIES 80 VALVES

Specifications

  • Recommended Flow Ranges:
    3/4" valve - .01 to 26 GPM
    1" valve - .01 to 44 GPM
    1 1/2" valve - .25 to 110 GPM
    2" valve - .25 to 176 GPM
  • Valve Configurations:
    3/4" and 1" valves - Globe
    1 1/2" and 2" valves - Globe or Angle
  • Standard 2-Way Electric Normally Closed Valve
  • Minimum Operating Pressure: 7 psi
  • Maximum Operating Pressure: 150 psi
  • Maximum Water Temperature: 140° F
  • Standard Solenoid Voltage: 24VAC± 10% voltage
  • Solenoid Inrush Current: .22A
  • Solenoid Holding Current: .095A
  • Optional Solenoid Voltage: 24VDC, 12VDC, 12VDC latching, 120VAC

Materials

  • Body, Bonnet, Diaphragm Seat: Glass Reinforced Polyamide (GRP)
  • Nuts, Bolts, Washers: Stainless Steel 304
  • Spring: Stainless Steel AISI 302

*Tested by Center for Irrigation Technology, Fresno, California, November 2010

*Tested by Center for Irrigation Technology, Fresno, California, November 2010

1" Globe Electric Control Valve
1 1/2" and 2" Globe 2-Way Electric Control Valves
1 1/2" and 2" Angle 2-Way Electric Control Valves
1 1/2" and 2" Globe/Angle 3-Way Pressure Reducing Control Valves
1 1/2" and 2" Globe/Angle 3-Way Pressure Sustaining Control Valves

Series 80 Control Valves Ordering

3-WAY SERIES 80 VALVES


2-WAY SERIES 80 VALVES