2" & 3" LP Disc-Kleen Filters Technical

Specifications

  • 2" drain manifold inlet and outlet connections: Grooved
  • Backflush valve flush port: 2” MPT
  • Maximum operating pressure: 
    • Standard Model: 90 psi
    • High Pressure Model: 140 psi
  • Minimum backflush pressure required: 
    • Standard Model: 30 psi
    • High Pressure Model: 40 psi
  • Minimum backflush flow rate:
    • - 2” Filter: 35 GPM
    • - 3” Filter: 70 GPM
  • Minimum allowable pH: 5
  • Inlet/outlet: 
    • 2” Disc-Kleen: 4” grooved
    • 3” Disc-Kleen: 6” grooved
  • Includes backflush controller

Materials

  • Manifold: Polypropylene
  • Filter Body: Polypropylene
  • Discs: Polypropylene
  • O-Rings and Seals: EPDM

2” and 3” Disc-Kleen Flow Rate vs. Pressure Graph

2” and 3” Disc-Kleen Flow Rate vs. Pressure Chart

2” Disc-Kleen Dimensions

3” Disc-Kleen Dimensions

Water Quality Maximum Flow Rate

 

Water Quality

  • Good Water Quality: Municipal water supply or well water from a clean aquifer with no sand, iron or manganese.
  • Average Water Quality: Wells with small amounts of sand (< 2 ppm) or clear surface water which includes lakes, ponds, reservoirs and canals.
  • Poor Water Quality: Well water with sand up to 10 ppm or surface water in hot climates with increased biological growth and no chemical treatment which includes lakes, ponds, reservoirs and canals.
  • Very Poor Water Quality: Well water with greater than 10 ppm of sand including rivers, muddy canals, lakes and ponds with severe run off deposits and raw municipal wastewater.
  • Greater than 3 ppm Sand or Silt: May require a pre-filter such as a Hydrocyclone.