SINGLE LINE DECODER FOR NLC-100D, NLC-100S HYBRID, NLC3D6 AND NLC3D24
DIMENSIONS: 1.5” x 1.4” x 2.3”
LEAD LENGTH: 11”
MODEL NUMBERS: NLCDECODER (Blue: NLC-100D)
NLC3DLD050 (Orange: NLC-100S Hybrid, NLC3D6 and NLC3D24)
The NLCSP100 provides protection along the 2-wire path from electrical surges due to lightning or other static charges. High voltage spikes traveling down the 2-wire path are effectively shunted to the ground through the NLCSP100 minimizing the risk to decoders and other devices. As an integral part of your 2-wire system, you’ll get added peace of mind during bad weather.
NORMAL SPARK OVER: 230V
MAX. SPARK OVER: 450V
MODEL NUMBER: NLCSP100
SENSOR DECODER FOR NLC3D6,NLC3D24 AND NLC-100S HYBRID
Fully programmable decoders that provide an interface between the NLC-3D and field sensors. This means that any type of sensor, such as flow, temperature or moisture, can be added to a new or existing system. The sensor decoder is installed on the same 2-wire pathas the line decoder so the sensor can be a considerable distance from the controller. Two models of flow sensor decoders based on the type of pulsed output register on the flow meter.
The sensor is wired directly to the 2-wire path. Inputs are color-coded for proper polarization. Sensor calibration is defined by the controller’s PC software and is then transferred to the controller via the RS232 connection. Includes built-in surge protection, Model NLCSP100.
4-20mA or pulses per time interfaces
Sensor resolution is 200 steps
Accuracy better than 1% of max. value
Factory programmed ID
NLC3DSD100 – use with reed switch
NLC3DSD100M – use with Photo Diode
NLC3D-FMVM – flow and master valve Combo Decoder. For use with NLC-3D and Hydrometer.