The world's most advanced continuous self-cleaning, pressure-compensating dripperline for wastewater.
Applications
- Can be used with domestic septic tank effluent of 220/220 (ppm) BOD/TSS with proper design, filtration and operation
- Typically installed following a treatment process
- Reuse applications including municipally treated effluent designated for irrigation
Features/Benefits
- Pressure Compensation - all drippers deliver equal flow, even on sloped or rolling terrain.
- Unique Flow Path - Turbonet technology provides more control of water and a high resistance to clogging.
- Continuous Self-Flushing Dripper Design - flushes debris, as it is detected - throughout operation, not just at the beginning or end of a cycle. Ensures uninterrupted dripper operation.
- Single Hole Dripper Outlet from Tubing
- Better protection against root intrusion
- Allows the dripperline to be used in subsurface applications without need for chemical protection
- Drippers Capture Water Flow From the Center of the Tubing - ensures that only the cleanest flow enters the dripper.
- Built-In Physical Root Barrier - drippers are protected from root intrusion without the need for chemical protection. Water exits dripper in one location while exiting the tubing in another.
- Three Dripper Flow Rates - provides the broadest range of flow rates available. Allows the designer to match the dripperline to any soil or slope condition.
- Bioline Tubing is Completely Wrapped in Purple - the complete tubing is purple,easily identifiying it as a non-potable, regardless of how the tubing is installed.
- Vinyzene-Impregnated Drippers - prevents buildup of microbial slime.
- Can be used subsurface - Bioline can be installed on-surface, under cover or subsurface.
- No Special Storage Requirements - does not degrade if stored outdoors.
- Techfilter Compatible - an optional level of protection, provides a limited lifetime warranty against root intrusion.
Specifications
- Dripper flow rates: 0.4, 0.6 or 0.9 GPH
- Dripper spacings: 12”, 18” or 24” dripper spacings and blank tubing
- Pressure compensation range: 7 to 70 psi(stainless steel clamps recommended above 50 psi)
- Maximum recommended system pressure: 50 psi
- Tubing diameter: 0.66” OD, 0.57” ID
- Tubing color: Purple color indicates non-potable
- Coil lengths: 500’ or 1,000’ (Blank tubing in 250’)
- Recommended filtration: 120 mesh
- Bending radius: 7”
- UV resistant
- Tubing material: Linear low-density polyethylene
Additional flow, spacings, and pipe sizes available by special order. Please contact Netafim USA Customer Service for details.
