Water Meters

Netafim registers, standard and digital, are simple to read and operate while providing reliable and accurate readings. Features include:

  • Hermetically sealed - guaranteed not to accumulate moisture or fog
  • Mounted in a dry compartment - no contact with the water
  • Instantaneous readings - easy to read
  • Electrical output - driven by a magnetic coupling that activates a reed switch creating a pulsed output for communicating with control and monitoring equipment
  • Interchangeable and easily replaced - only need common tools
  • Removable - even when the meter is operating

Standard Register - Acre Feet

Standard Register - Gallon

 

STANDARD REGISTER

Gallon or Acre Feet Totalizer

The standard register includes pulsed output for communicating with control and monitoring equipment. A leak indicator located inthe center of the dial registers the lowest flow through the meter. If services are shut off and the dial continues to rotate, there maybe a leak in the system network.

Flows are totalled in U.S. Gallons and each dial face indicates the multiplication factor (located directly under the totalizer reading)or flows are totalled in Acre Feet with the decimal point indicated in blue on the register. Three small fractional dials measure quantities smaller than the totalizer reading.

 

Reed Switch

 

Pulse Output – pulse reed switch is activated by a magnet and acts as a “dry contact” and can be used with both Gallon and Acre Feet Totalizer registers.

 

Water Meter Photo Diode Register

PHOTO DIODE REGISTER

Gallon Totalizer

A sensor combines an IR light source and a light sensitive diode in one package. Signals are created when the light beam createdby the IR light is interrupted by a rotating element. Includes pulse output (open collector) for communicating with control and monitoring equipment. This register requires a constant supply of DC power. Flows are totalled in U.S. Gallons based on the multiplication factors indicated on the dial face.

 

MPE Digital Register - Gallon

 

Multi-Purpose Electronic (MPE) Digital Register

GPM Rate of Flow with Gallon or Acre Feet Totalizer

Combines electronic register features with dry pulse output capabilities. Operated by an internal lithium battery with a 10 year life and mounted inside a stainless steel glass encapsulated cup. Register data is stored on an internal chip and retrievable if the register is damaged. The register’s LCD screen clearly displays the Rate of Flow in Gallons per Minute (GPM) and Total Volume in U.S. Gallons (U.S.G.) or Acre Feet.

MPE Digital Register with Pulse Output